Standard And Race Clip On Handle
Filter by manufacturer
39mm low riser clip ons
These stainless steel , polised clip ons are machined to a 0.1mm tolerence then tig welded. they are 20mm higher and forward from the top front edage of the clamping sleeve. 270mm bar length unlkess requested otherwise , open bar ends unless threaded bosses are requested ( @ $20 extra)
New Zealand WOF load test approved.
$300.00 NZD
Manufacturer. Universal Parts
Part No. 491
More Information
41mm low riser clip ons
These clip ons are Tig Welded from 304ss . Bars are 270mm long , supplied with hollow ends , alloy end plugs can be purchased seperatley. Or M6 bosses can be welded into the ends at $20 extra. Note: any size clip on can be manufactured just choose the multi size order and enter the size you wish on the comments section.
New Zealand WOF load test approved.
$300.00 NZD
Manufacturer. Universal Parts
Part No. 499
More Information
48mm low riser clip ons
These stainless steel high rise clip ons are approx 20mm forward and 25mm higher than the butt welded option. the bar ends are open unless threades bosses are requested @ $20 extra. Bra lenght is 270mm unless requested otherwise.
New Zealand WOF load test approved.
$320.00 NZD
Manufacturer. Universal Parts
Part No. 492
More Information
Aprilia RS 250 Clip Ons
Tig welded 316 Stainless steel, 9 degree angle, end plugs not included, stronger than OEM items .
New Zealand WOF load test approved.
$320.00 NZD
Manufacturer. Aprilia
Part No. 180
More Information
Aprilia RSV 1000 Mille 99-05 Factory / R 06 Clip Ons
TO SUIT THE Ohlins forks 51mm ,TIG WELDED STAINLESS STEEL , these clip ons are stronger tahn OEM items they bring your bars forward and up and are also wider . Butt welded clip ons can also be used they are approx 12mm lower than oem bars .
New Zealand WOF load test approved.
$320.00 NZD
Manufacturer. Aprilia
Part No. 93
More Information
Aprilia RSV1000 Mille Clip ons
These Stainless Steel clip ons are to suit the Base model Showa forks (52.8mm) 9 degree angle they are slightly forward and up from the oem items , Butt welded version will also fit and will lower the bars by approx 12mm ,Much stronger than standard items.
New Zealand WOF load test approved.
$320.00 NZD
Manufacturer. Aprilia
Part No. 338
More Information
Aprilia RSV4 Race Clip ons
These clip ons are Tig welded from 304 stainless steel , they are wider and further forward than the oem ones giving a better crouch position for taller riders. Also stronger than oem items. Replacement bars available separately
New Zealand WOF load test approved.
$340.00 NZD
Manufacturer. Aprilia
Part No. 471
More Information
Ducati 1198s 1098s clip ons
These are tig welded from 304 SS . 53mm sleeves. They are longer than our standard bars at 295mm so the lever protector can be fitted and the GP master cyl/short lever could be fitted in. Extra leverage and more forward riding position helps muscle the beast around and keep the weight more forward. Open ends on the bars anodised bar ends to suit are an extra $25 or threaded bosses can be fitted for extra $20
New Zealand WOF load test approved.
$320.00 NZD
Manufacturer. Ducati
Part No. 577
More Information
Ducati 748, 916,996,998 race clip ons
These 304 Stainless Steel full replacement clip ons use the twin pinch bolt clamp system which allows the bars to be set further forward for more room and what most riders find is a better angle on the wrists and are slightly wider than oem. They come supplied with anodised bar ends in either black gold or Natural. pre 2001 748 and all 916 models will need a res bowl mount on the l/h side as well as the right so please advise us of your model . Replacement bars available seperatly.
New Zealand WOF load test approved.
$340.00 NZD
Manufacturer. Ducati
Part No. 534
More Information
Ducati 750 Sport standard clip-ons
Ducati 750 Sport standard clip-ons, 40mm low riser clip-ons, manufactured from 304 SS, hollow ends, anodised ali bar ends can be purchased seperately or M6 bosses can be welded into ends for an extra $20.00
New Zealand WOF load test approved.
$320.00 NZD
Manufacturer. Ducati
Part No. 468
More Information
Ducati 916 Clip Ons
Aluminium replacement tubes machined from soild bar drilled out to OEM ID , $89 each or $160 a pair, slip straight into standard clamps ( not drilled for the switch blocks or throttle)
New Zealand WOF load test approved.
$89.00 NZD
Manufacturer. Ducati
Part No. 185
More Information
Ducati Bevel 38mm Butt welded clipons
Ducati Bevel 38mm Butt welded clipons, supplied with 19mm ID hollow ends. Ali anodised bar ends available seperately for $25.00 or M6 bosses can be welded into ends for an extra $20.00.
New Zealand WOF load test approved.
$275.00 NZD
Manufacturer. Ducati
Part No. 470
More Information
Ducati F1750 1985 38mm low riser clip ons
These stainless steel clip ons tig welded from 304 SS polished finish but can be powder coated black for an extra $30 , bar length is 270mm unless requested otherwise . Bar ends are open unless threaded bosses are requested ( $20 extra)
New Zealand WOF load test approved.
$320.00 NZD
Manufacturer. Universal Parts
Part No. 490
More Information
Ducati F1750 1986-88 40mm clip ons
These Clip ons are made from a jig replicating the oem F1750 bar position and style . Difference being they are tig welded from 304 Stainless steel . They come in a polished finish but for an extra $30 we can powder coat them black as per the picture .
New Zealand WOF load test approved.
$340.00 NZD
Manufacturer. Ducati
Part No. 574
More InformationDucati Panigale 1199s
Rapid Art Racebitz 304 Stainless Steel butt welded 9 degree race clip ons 280mm long Tig welded tubes ( r/h can be manufactured longer to suit brake lever guard if requested ) Supplied with 19mm hollow ends or M6 threaded bosses can be tack welded in for $20 extra .
New Zealand WOF load test approved.
$340.00 NZD
Manufacturer. Ducati
Part No. 689
More Information
Harley Davidson Sportster 883 / 1200 Clip Ons
As used in Twin Sport racing , 9 degree angle in 37mm or 39mm depending on year , Available with either 1" pictured or 7/8" bars which are $255.00 , please note which size when ordering.
New Zealand WOF load test approved.
$275.00 NZD
Manufacturer. Harley Davidson
Part No. 186
More Information
Honda CBR1000RR 04-07 Clip ons
These SS Clip ons are replacement items for the OEM items they are only slighty further forward and are 15mm wider (unless requested OEM length)
New Zealand WOF load test approved.
$300.00 NZD
Manufacturer. Honda
Part No. 335
More Information
Honda CBR400 RR Clip Ons
Tig Welded 316 Stainless Steel , Much stronger than standard items , also wider for more leverage , end weights available seperatley.
New Zealand WOF load test approved.
$265.00 NZD
Manufacturer. Honda
Part No. 118
More Information
Honda CBR600 (95-98) Clip Ons
41mm Tig welded from stainless Steel , stronger and wider than standard items , end weights avaliable seperatley,
New Zealand WOF load test approved.
$280.00 NZD
Manufacturer. Honda
Part No. 106
More Information
Honda CBR600(99-02) Clip Ons
43mm Tig welded 316 Stainless steel, stronger and wider than standard , end plugs available seperatley.
New Zealand WOF load test approved.
$280.00 NZD
Manufacturer. Honda
Part No. 116
More Information
Honda CBR600RR 05-06 Clip ons
48mm low riser clip ons machined and tig welded from 304 stainless Steel bar is 270mm overall length , longer than oem for more leverage. Ali anodised bar ends available seperately or m6 bosses can be welded into the end to take OEM end weights if requested at $20 extra.
New Zealand WOF load test approved.
$300.00 NZD
Manufacturer. Honda
Part No. 365
More Information
Honda CBR929/954 Clip Ons
Tig Welded 316 Stainless Steel , positioned slightly forward and wider than OEM items , much stronger if needed replacement bars available seperatley.
New Zealand WOF load test approved.
$300.00 NZD
Manufacturer. Honda
Part No. 117
More Information
Honda RS125 Clip Ons
22mm Aliuminium replacement tubes ( drilled from soild bar 16mm ID )for standard clamps 270mm long $115 for the pair or $60 each.
New Zealand WOF load test approved.
$115.00 NZD
Manufacturer. Honda
Part No. 119
More Information
Kawasaki ER6 Race Clip Ons
These Rapid Art Butt welded clip ons are tig welded from 304 stainless steel . They have open ends our handle bar end plugs are sold separately for $25.00 . Replacement bars available singlely. Price is for the pair.
New Zealand WOF load test approved.
$265.00 NZD
Manufacturer. Kawasaki
Part No. 261
More Information
Kawasaki ZX10 04 05 Clip Ons
TIG WELDED in 316 Stainless Steel , same position as standard only these have two clamping internal diameters so the can be moved down the fork leg to allow ride height adjustment.Bar lenght 270mm unless requested otherwise. Bar ends are open unless threaded bosses are requested @ $20 extra.
New Zealand WOF load test approved.
$310.00 NZD
Manufacturer. Kawasaki
Part No. 150
More Information
Kawasaki ZX10 06 -07 Race clip ons
Tig welded from stainless steel . bar are 270mm long unbless requested otherwise , bar ends are open unless threaded bosses are requesed @ $20 extra. Replacement bars sold individually.
New Zealand WOF load test approved.
$255.00 NZD
Manufacturer. Kawasaki
Part No. 319
More Information
Kawasaki ZX10 08-10 Clip ons
These clip ons are Tig Welded from 304 SS. the bars are 270mm long and they have holow ends. End plugs can be purchsed seperatley, or M6 bosses can be welded into the ends at $20 extra.
New Zealand WOF load test approved.
$255.00 NZD
Manufacturer. Kawasaki
Part No. 500
More Information
Kawasaki ZX12 Clip Ons
These Stainless Steel Clip ons where custom made for a race bike , they do not fit into the OEM triple clamp bar mounting but bolt to the stauntion underneath the top triple clamp . They move your bars forward and down fron standard.
New Zealand WOF load test approved.
$275.00 NZD
Manufacturer. Kawasaki
Part No. 149
More Information
Kawasaki ZX6 (01-02) Clip Ons
46mm Tig welded from stainless steel , 9 degree angle , wider than standard bars and much stronger. End plugs available seperatley.
New Zealand WOF load test approved.
$255.00 NZD
Manufacturer. Kawasaki
Part No. 146
More Information
Kawasaki ZX6 (95-97) Clip Ons
Tig welded from Stainless steel , 41mm these bars are stronger than standard items , also wider , 9 degree angle .
New Zealand WOF load test approved.
$255.00 NZD
Manufacturer. Kawasaki
Part No. 144
More Information
Kawasaki ZX6 (98-00) Clip Ons
Tig welded from Stainless Steel , 46mm , these bars are stronger than standard items , 9 degree angle and wider than OEM .end plugs available seperatley.
New Zealand WOF load test approved.
$255.00 NZD
Manufacturer. Kawasaki
Part No. 145
More Information
Kawasaki ZX6RR 03-06
Stainless Steel Tig Welded , 9 degree angle , these bars are wider than standard and are much stronger . Anodised end plugs avalible seperately.
New Zealand WOF load test approved.
$275.00 NZD
Manufacturer. Kawasaki
Part No. 156
More Information
Kawasaki ZX7 (96-00) Clip Ons
Tig Welded from stainless steel , 9 degree angle , these bars are stronger than OEM items , also wider , end plugs available seperatley.
New Zealand WOF load test approved.
$275.00 NZD
Manufacturer. Kawasaki
Part No. 147
More Information
Kawasaki ZXR400 Clip Ons
Tig Welded from stainless steel , 9 degree angle , these bars will bring your position forward and up slightly , the Butt welded option is also available which will lower your riding position , stronger than OEM items.
New Zealand WOF load test approved.
$275.00 NZD
Manufacturer. Kawasaki
Part No. 143
More Information
KTM 390 Duke race clip ons
These Rapid Art custom made clip ons are manufactured from 304 stainless steel are Tig welded then finished with a high polish. They are a must for setting your 390 up for a great racing position combined with out race rearsets. The standard throttle and clutch cables can be retained . However the steering stops need to be modified by at leas 3mm on each side to reduce the steering lock to fit them in . Replacement bars sold separately. More pictures available on request.
New Zealand WOF load test approved.
$340.00 NZD
Manufacturer. KTM
Part No. 565
More Information
KTM390RC Race clip ons
These Stainless Steel clip ons are designed to replace the OEM clip ons and do fit with the OEM top triple clamp . The forward risers bring them out enough to clear the oem clip ons mnt castings. They are secured with twin pinch bolts and do not bolt into the triple clamp so can be positioned at a width and height which suits the rider ( and fairing clearance. Finished in a high polished stainless steel clip ons pictures have been powder coated black at an extra cost of $30.00
New Zealand WOF load test approved.
$340.00 NZD
Manufacturer. KTM
Part No. 184
More Information
Multi sizes 28 to 46mm Butt-welded Clipons
sizes: 28 31 ,32-33-34.5- 35-36- 37- 38- 39- 40- 41- 42- 43- 45 and 46mm. Machined from 304 stainless steel. 9 degree inclined bar angle. Approx 733 grams per pair. Aliuminium anodised bar ends avaliable seperately or M6 bosses can be welded into the end to take your OEM end weights at a cost of $20 extra.
New Zealand WOF load test approved.
$265.00 NZD
Manufacturer. Universal Parts
Part No. 85
More Information
Multi sizes 28 to 46mm Low-rise Clipons
sizes: 28,32-33-34.5- 35-36- 37- 38- 39- 40- 41- 42- 43- 45- and 46mm. Machined from 316 stainless steel. 22mm risers... 20mm forward and up from the stanchions at the top edge of the clip on sleeve, 9 degree inclined bar angle. Approx 750 grams per pair. M6 bosses can be welded into the end to take OEM end weights if requested at $20 extra.
New Zealand WOF load test approved.
$320.00 NZD
Manufacturer. Universal Parts
Part No. 87
More Information
Multi sizes 48 to 58mm Low-rise Clipons
sizes:48- 50- 52- 52.8- 51-54 53 , 53.5 , 55, 58 . Machined from 304 stainless steel. 22mm risers... 20mm forward and up from the top of the mounting sleeve. 9 degree inclined bar angle. Approx 750 grams per pair.end plugs available seperatley. Very strong will bend in severe inpact but never snap , can be bent back into place without weakening , replacement bars available individually. M6 bosses can be welded into the end to take OEM end weights if requested at a cost of $20 extra.
New Zealand WOF load test approved.
$350.00 NZD
Manufacturer. Universal Parts
Part No. 88
More Information
Multi sizes from 48 to 58mm Butt-welded Clipons
sizes:48- 50-51-52- 52.8- 53- 53.5 , 54, 55, 58mm. Machined and tig welded from 304 stainless steel. 9 degree inclined bar angle. Approx 733 grams per pair. Very strong severe inpact will bend but will never snap can be bent back into place without weakening , Replacement bars available individually, end weights available seperatley. M6 bosses can be welded in the end to take OEM end weights if requested at a cost of $20 extra.
New Zealand WOF load test approved.
$300.00 NZD
Manufacturer. Universal Parts
Part No. 86
More Information
Norton Manx Clip Ons
34.5mm Tig welded from 304 Stainless Steel ( please add a note in the comments section if your stauntions are a different size than the usual 34.5mm))
New Zealand WOF load test approved.
$275.00 NZD
Manufacturer. Norton
Part No. 193
More Information
Size 50 mm Alloy Clip Ons
Machined from 6061 aluminium. 9 degree angle. Replacement tubes available.
New Zealand WOF load test approved.
$499.00 NZD
Manufacturer. Universal Parts
Part No. 199
More Information
Size 52 mm Alloy Clip Ons
Machined from 6061 aluminium. 9 degree angle. Replacement tubes available.
New Zealand WOF load test approved.
$499.00 NZD
Manufacturer. Universal Parts
Part No. 200
More Information
Suzuki FXR150 Race Clip ons
These 33mm 9 degree butt welded clip ons are manufactured from stainless steel and are much stronger than standard.
New Zealand WOF load test approved.
$275.00 NZD
Manufacturer. Suzuki
Part No. 341
More Information
Suzuki GS1000 GSX1100 37mm Low Riser Clip ons
Tig welded from 304 stainless steel , 9 degree angle 270mm overall length of bar , most commonly used for Suzuki's in NZ Post Classic Racing. End Plugs available seperatley or M6 bosses can be welded into the ends on request for an extra $20.
New Zealand WOF load test approved.
$320.00 NZD
Manufacturer. Suzuki
Part No. 345
More Information
Suzuki GSXR 1000 K1/2 Clip Ons
Tig welded from Stainless Steel , these bars will bring your riding position forward by about 15mm they are also wider but can be shorterned if you wish , end plugs available seperatly
New Zealand WOF load test approved.
$275.00 NZD
Manufacturer. Suzuki
Part No. 27
More Information
Suzuki GSXR 1000 K3/4 Clip Ons
Tig Welded from Stainless Steel , these clip ons will bring your riding position forward by about 20mm , and they are wider and stronger than OEM , butt welded option can also be used but they leave little room for your hands between the fairing at full lock, end plugs avalible seperately.
New Zealand WOF load test approved.
$275.00 NZD
Manufacturer. Suzuki
Part No. 28
More Information
Suzuki GSXR600 K4 K5 Replacement clip ons
These are 50mm Butt welded clip ons very similar position to the oem bars only wider and much stronger with the option of setting the pullback to your own preferrence as they do not bolt into the top triple clamp. They have a M6 boss weled in the top of the r/h bar to mount the brake Reservoir off . The ends are open but can be supplied with M6 bosses welded in the ends for the OEM end weights for and extra $20 if requested, otherwise for racing we recommend using our 40gm ali anodised end plugs avaliable seperatley.
New Zealand WOF load test approved.
$275.00 NZD
Manufacturer. Suzuki
Part No. 462
More Information
Suzuki GSXR600/750 K6/7 Replacement clip ons
These Stainless Steel Clip ons are very strong and can be straightened in place without compromising strength ,wider than standard for more leverage, comes with brake fluid Reservior mounting point , open ends- see F1E bar ends to suit , available seperatley.
New Zealand WOF load test approved.
$275.00 NZD
Manufacturer. Suzuki
Part No. 332
More Information
Suzuki GSXR750 (00-02) Clip Ons
Tig welded 316 SS , stronger and wider than OEM items , repacement bars available seperatley.
New Zealand WOF load test approved.
$275.00 NZD
Manufacturer. Suzuki
Part No. 26
More Information
Suzuki GSXR750 (97-99) Clip Ons
Tig Welded 316 SS, stronger and wider than OEM items , 9 degree angle
New Zealand WOF load test approved.
$275.00 NZD
Manufacturer. Suzuki
Part No. 25
More Information
Suzuki SV650 Race Clip Ons
Tig welded 316 SS , 9 degree angle 41mm ,please note the different stauntion size if you have a different model front end fitted , these bars are much stronger than standard but if the are damaged replacement bars are available individually, anodosied end plugs available seperately.
New Zealand WOF load test approved.
$300.00 NZD
Manufacturer. Suzuki
Part No. 29
More Information
SuzukiGSXR600 (97-99) Clip Ons
Tig welded Stainless Steel , end plugs available seperatley , stronger and wider than OEM items .
New Zealand WOF load test approved.
$255.00 NZD
Manufacturer. Suzuki
Part No. 24
More Information
Triumph 675 clip ons
Manufactured from 316 Stainless Steel , these 9 degree replacement cli pons are stronger then standard and longer supplied with spacer and mount for brake res bowl. . Also avalible in a 5 degree anle to raise the end of the bar by approx 22mm for more comfort @ $35 extra.
New Zealand WOF load test approved.
$320.00 NZD
Manufacturer. Triumph
Part No. 340
More Information
Triumph TT600 Clip Ons
Tig welded 316 Stainless Steel , 9 degree angle , stronger than oem items.
New Zealand WOF load test approved.
$255.00 NZD
Manufacturer. Triumph
Part No. 73
More Information
Yamaha R1 (00-02) Clip Ons
316 stainless steel ,tig welded , positioned slightly forward and wider than OEM items , 9 degree angle .
New Zealand WOF load test approved.
$275.00 NZD
Manufacturer. Yamaha
Part No. 10
More Information
Yamaha R1 (98-99) Clip Ons
Tig Welded 316 stainless Steel, 9 degree angle , moves position forward and wider than OEM .
New Zealand WOF load test approved.
$275.00 NZD
Manufacturer. Yamaha
Part No. 92
More Information
Yamaha R6 99-05 Clip Ons
43mm tig welded 316 stainless steel, these clip ons repositon your bars up and forward by 20mm for more room to tuck in , the are also much stronger than OEM items. 9 degree angle , replacement bars available seperatley.
New Zealand WOF load test approved.
$255.00 NZD
Manufacturer. Yamaha
Part No. 91
More Information
F1E Motorcycle Works
Phone: +64 275 433 960
E-mail: steve@f1e.nz